PLA
from 5 UAH/g
Precise and smooth — for decor, figurines, prototypes and models.
- Accuracy down to 100 µm
- Smooth surface, easy to paint
- Wide choice of colours
Which enclosures we print
- Ventilated enclosures for temperature and humidity sensors (BME280, SHT, DHT22) — with louvres: air gets through, direct sun and rain don’t.
- Enclosures for motion and light sensors — with a window for the lens and wall-mount tabs.
- Enclosures for 35 mm DIN rail for relays, controllers and DIY modules — sized to distribution-board modules, with a step for the panel window.
- Enclosures for timer and voltage relays, smart switches, Zigbee gateways and leak sensors.
Enclosures for Arduino, ESP32 and Raspberry Pi boards are on a separate page.
Material: it depends on where the enclosure will be
Indoors, PLA will do. For outdoors, a bathroom, a basement or a distribution board we recommend PETG: it isn’t afraid of moisture, holds its shape up to about 70 °C and copes better with temperature swings. For an outdoor sensor choose a light colour — it heats up less in the sun, and the readings are more accurate.
What to keep in mind
- Place the temperature sensor away from the board and regulator — they warm the air inside the enclosure.
- A printed enclosure isn’t watertight by itself: for outdoors, add a gasket and a cable gland.
- A DIN-rail enclosure protects the board from dust and touch, but install the mains side according to electrical safety rules.
Wall thickness, ventilation, snap-fits and FDM tolerances are covered in the guide how to design an electronics enclosure for 3D printing.
How to order
Send your model in STL, OBJ, STEP or 3MF format through the request form or a messenger and tell us the colour you want — we’ll quote the price and lead time within an hour. We print from your ready-made model. No file? We’ll tell you where to find a ready-made model (Printables, Thingiverse, MakerWorld) or model it ourselves from a drawing or exact dimensions; modelling is charged separately.
The minimum order is 250 UAH. Small enclosures are best ordered several at a time — for several rooms or sensors — we print identical ones on one bed. We ship finished parts by Nova Poshta anywhere in Ukraine on the day printing is finished. More about rates on the 3D printing prices page.
Enclosures for power banks, UPS units and batteries18650 and 21700 power banks, router UPS units, battery packs and power supplies.
Power Station Enclosure for Your Batteries and InverterAn enclosure for your batteries, BMS and inverter — PETG parts with cut-outs for sockets, a display and fans.
Enclosures for Arduino, ESP32 and Raspberry PiArduino Uno and Nano, ESP32, Raspberry Pi 4 and 5 — with cut-outs for connectors and board standoffs.
Mounts and enclosures for Starlink Mini and StandardMini and Standard: brackets, stands, router and power supply holders, cable clips.
Enclosures and mounts for the military and volunteersTourniquet holders, power enclosures, mounts for radios, antennas, detectors and Starlink.