Mounts and enclosures for Starlink Mini and Standard

What we print for Starlink Mini

• Brackets for a wall, mast or balcony — they grip the edge of the dish (38.5 mm thick) and are fixed with screws.
• Angled stands for a windowsill, a table or a house roof.
• Corner protectors for the edges of the dish — against knocks in transport.
• Enclosures for UPS units and 12 V power supplies that run Starlink Mini — on the power bank and UPS enclosures page.
• Cable holders and organisers.

For a car roof we recommend a ready-made metal mount: at speed the load on a plastic part is too high.

For the Standard Starlink

The Standard dish measures 594 × 383 × 39.7 mm and weighs 2.9 kg without the kickstand: its area is almost three times that of the Mini, so the wind pushes on it harder too. We recommend mounting the dish itself on a pipe or mast with a metal adapter — the official Starlink Pipe Adapter fits metal pipes from 31 to 50.8 mm. We print everything around it:

• Gen 3 router holders (298.6 × 120.4 × 43.4 mm) for a wall or a cabinet — open at the bottom for the cables.
• Power supply clamps (173 × 93 × 36 mm) for a wall.
• Cable clips and holders for a wall, pipe or mast.
• Enclosures for the UPS that powers the kit — on the power bank and UPS enclosures page.

What such parts cost is in the examples below.

The dish is larger than the print bed

Starlink Mini measures 298.5 × 259 × 38.5 mm, and our printer’s build volume is 256 × 256 × 256 mm. Brackets, stands and corners fit easily, while a full case or frame for the whole dish is printed in parts — if the model is split into parts with screw joints.

Why PETG

The dish works outdoors — in sun, rain and frost. PETG isn’t afraid of moisture and holds its shape up to about 70 °C; PLA isn’t suitable for outdoors. We print brackets with more walls and denser infill, so the part carries the weight of the dish (about 1.1 kg) and the wind.

How to order

Send your model in STL, OBJ, STEP or 3MF format through the request form or a messenger and tell us the colour you want — we’ll quote the price and lead time within an hour. We print from your ready-made model. No file? We’ll tell you where to find a ready-made model (Printables, Thingiverse, MakerWorld) or model it ourselves from a drawing or exact dimensions; modelling is charged separately.

The minimum order is 250 UAH. Paired parts — brackets, stands, corners — are printed as a set on one bed. We ship finished parts by Nova Poshta anywhere in Ukraine on the day printing is finished. More about rates on the 3D printing prices page.