Organiser and Accessories for the Toyota RAV4 2019–2025

Three products for the fifth-generation RAV4: the tray splits the deep armrest into compartments, the drawer turns the open cubby left of the wheel into a pull-out one, and the expander holds a one-litre flask.

Get a price All models

Models

PETG in any colour — tell us the year and trim of your car in the request and we’ll reply with the price. Printed to order from 1 day, shipped by Nova Poshta across Ukraine.

Armrest organiser tray
Rests on the ledge of the deep cubby and splits the top into compartments: a 6.7″ phone lying flat, two coin cups, a card slot and room for keys. The whole cubby stays free below.

Size
239 × 139 × 38 mm
Included
self-adhesive feet

Get a price
Pull-out drawer for the driver’s cubby
The open cubby left of the wheel becomes a drawer with dividers. It clicks shut and at 100 mm open — it won’t slide out under braking.

Size
175 × 148 × 70 mm
Included
EVA foam

Get a price
Cup holder expander for a bottle
Plugs into the stock cup holder and holds a one-litre flask or a bottle up to 96 mm across. A slot in the wall takes a mug handle.

Size
100 mm cup, 92 mm tall
Included
—

Get a price
Didn’t find your version?
Tell us what you need — we’ll pick one of ours or make one just for you.
- A different size or colour
- Your text, name or logo
- A completely different shape — we’ll model it ourselves
Message us
We reply within an hour during working hours. Modelling is charged separately.

Armrest tray

The RAV4’s armrest cubby is deep, and everything gets mixed up at the bottom. The tray rests on the cubby’s ledge and splits the top into compartments: a 6.7″ phone in a case lies flat, next to it are two coin cups and a sloped card slot, and at the back there is room for keys and earbuds. Six spring tabs press against the walls, so the tray doesn’t move or rattle and the armrest lid still closes.

A drawer for the cubby left of the wheel

Things fall out of the open cubby by the wheel while driving. A sleeve goes into the cubby on strips of foam — it takes up size variation and damps vibration — and a drawer with a large compartment and three cells slides inside it. Spring tabs click into grooves: the drawer clicks shut and at 100 mm open and won’t slide out under braking.

Cup holder expander

The RAV4’s stock cup holders are made for a can or a coffee, and a one-litre flask won’t fit. The expander plugs into the holder, three spring petals press it against the walls, and on top is a 100 mm cup. It’s round, so it turns in the holder and the mug-handle slot goes wherever is handy.

Limitations

We took the cubby sizes from accessories sold for the 2019+ RAV4 and from owners’ measurements. Trims with wireless charging or the Prime console may differ — check the fit with a test piece.
The expander sits on the console in the sun: dark PETG can soften, so we recommend a light colour.
Doesn’t fit the new XA60 generation RAV4.

Close-up

The drawer and its sleeve apart: the sleeve sits in the cubby on foam, and the drawer slides in it and clicks on its catch.

The expander in section: a plug with spring petals in the cup holder and a cup for the bottle on top.

Images are renders of the 3D model — this is how the product will look once printed.

FAQ

How much do RAV4 accessories cost?

Press “Get a price” next to the product you want and tell us the year and trim of your car — we’ll reply with the price within an hour during working hours.

Will they fit the Hybrid and Prime?

Yes, they are made for the 2019–2025 RAV4 XA50, including the Hybrid and Prime. The Prime console may differ — so we recommend a test piece first.

What is a test piece?

A thin slice of the product’s seat that prints several times faster. Put it in your car and you’ll see whether the product fits before the full print.

Won’t it rattle while driving?

No: the tray is held by spring tabs, the drawer by foam and a catch, the expander by spring petals.

Is this an original Toyota accessory?

No, it’s our own design that fits the RAV4 XA50. There are no brand logos on it.

How do I pay and how long does it take?

Full prepayment to a card or our business account after we confirm the order. Printing takes from 1 day, Nova Poshta delivery usually 1–2 days.

Other products

All ready-made products (40)All 3D printing services

Need another accessory for your RAV4?

There’s plenty more we can print for the RAV4: door pocket inserts, holders, boot organisers. Tell us what you need.

Telegram WhatsApp Fill in the form