UA Send your model

POS terminal stand

The terminal on the counter does not fall, slide around or refuse to turn towards the customer. Chip cards go in from below without taking the terminal out, and the screen and keys stay uncovered.

Order the swivel stand — 890 UAHAll versions and prices
POS terminal stands

Versions and prices

Fixed price: printed in PETG with mounting hardware included. Printed to order from 1 day and shipped by Nova Poshta across Ukraine.

Made for your terminal model

Metal holders are usually universal, but we make our cradles for a specific terminal model. Chip cards go in from below without removing the terminal: there is a 60 mm slot between the cups. The printer hump at the top back always sits above the backrest, so the terminal lifts out with one hand. The jaws reach only 3.5 mm onto the face — the screen and keys stay uncovered. Tell us your terminal model, and we will check the thickness, printer hump, card slot and charging port before printing.

Stability — honestly

A terminal weighs 0.3–0.5 kg and sits high up. So any desk stand without fixings, metal ones included, tips backwards if you press the top of the screen. Every one of our bases has countersunk holes for 2–3 screws into the counter, hidden under the terminal or the disc — then the stand will not budge. Without screws, use two strips of VHB tape.

Theft protection

The screws into the counter are hidden, and at the back there is a Ø9 mm eyelet for a steel cable lock. We do not lock the terminal itself: it has to be handed to the customer.

For venues — with your logo

We put your venue’s name and logo on the plate, raised in a second colour. For each new client we reprint only the plate, so a batch of 10 stands costs 520 UAH each. The logo should be solid shapes, without fine lines or gradients. We do not print bank or payment-system logos.

Material

We print in PETG: it stays on the counter for years and is not afraid of alcohol or cleaning products.

Close-up

What the swivel stand is made of: a base with latches, a disc with the cradle, a bolt, a washer and a nut.
What the swivel stand is made of: a base with latches, a disc with the cradle, a bolt, a washer and a nut.
Stands for three venues: each with its own colour and plate.
Stands for three venues: each with its own colour and plate.

Images are renders of the 3D model — this is how the product will look once printed.

FAQ

Will it fit my terminal?

The swivel stand, wall holster and station are made for your model — tell us its name, and we will check the dimensions before printing. The universal angled stand fits any terminal 70–92 mm wide.

Can a card go in without removing the terminal?

Yes, chip cards go in from below: there is a 60 mm slot between the cups of the cradle.

Won’t the stand tip over?

Without fixings, any desk stand can tip over when you press the screen. That is why the base has countersunk holes for screws into the counter, or you can use VHB tape instead.

Does it protect against theft?

The screws are hidden, and there is an eyelet at the back for a steel cable lock. We do not lock the terminal itself, as it is handed to the customer.

Can it have our logo?

Yes, on the plate, raised in a second colour. One stand costs 590 UAH; from 10 stands, 520 UAH each.

Can I wipe it with alcohol?

Yes, PETG is not afraid of alcohol or cleaning products.

Other products

All ready-made products (40)All 3D printing services

A different terminal model?

Tell us the terminal model and send photos of its side and bottom — we will adapt the cradle to it for the same price.

Telegram Fill in the form

POS terminal stands

The order is already filled in — add your phone or Telegram username. We’ll confirm the order and lead time within an hour during working hours; payment is 100% upfront once confirmed.

3D printing order (EN)
Or email — whichever suits you. We reply within an hour during working hours.

By clicking the button, you agree that we’ll use these details only to reply to your request. Privacy policy