Wall-Mounted Hair Dryer Holder — No Drilling

The dryer goes into the holder and stays put: it won’t slide out if you catch the cord, and the attachments don’t fall out. It mounts with double-sided VHB tape, no drilling — we calculated the tape area for the dryer’s weight — or with two screws.

Get a price All models

Models

PETG in any colour — tell us the colour and your dryer model in the request and we’ll reply with the price. Printed to order from 1 day, shipped by Nova Poshta across Ukraine.

Round-head dryer + 2 attachments
For dryers like the Dyson Supersonic: the head rests in a cradle, the handle in a slot, and two attachments stand in cups on either side. A lip at the end stops the dryer sliding forward.

Size
234 × 160 mm, 119 mm deep
Included
VHB tape or 2 screws with plugs

Get a price
Multi-styler organiser
For stylers like the Dyson Airwrap: the body and six attachments on two steps. The lower step’s heads pass in front of the upper one, so the organiser is only 24 cm wide.

Size
241 × 140 mm, 119 mm deep
Included
VHB tape or 2 screws with plugs

Get a price
Universal cone with a cord hook
For any dryer: lower it handle-down and it settles into the cone by itself. A hook underneath holds the coiled cord.

Size
90 × 222 mm, handle up to 48 mm
Included
VHB tape or 2 screws with plugs

Get a price
Didn’t find your version?
Tell us what you need — we’ll pick one of ours or make one just for you.
- A different size or colour
- Your text, name or logo
- A completely different shape — we’ll model it ourselves
Message us
We reply within an hour during working hours. Modelling is charged separately.

The dryer stays put and doesn’t fall out

The holder is a “horseshoe” open at the front: you slide the dryer in and it settles into place. In the round-head holder the head rests in a cradle sized to it, and there is a 3.5 mm lip at the end of the rails — the dryer won’t slide out if you catch the cord, yet lifts out easily. The attachments stand in cups and can’t drop through the front opening: it is narrower than their collar.

The cups and cradle are open at the front: water drains and you can see what’s inside.

No drilling — on VHB tape

Double-sided 3M VHB tape holds the holder on tiles, glass or a painted wall. We calculated how much tape to use for the weight of the dryer with the holder and a tug on the cord — with a margin. If the wall is rough or you prefer extra security, the back plate has two holes for countersunk screws.

The hot nozzle never touches the plastic

PETG softens at around 70 °C, and a dryer’s nozzle gets hotter on full power. That’s why the holders only touch the dryer’s body and handle, not the nozzle. The universal cone is for handle-down use only: that way the hot nozzle ends up on top, away from the holder.

Limitations

The round-head holder fits heads up to 78 mm and handles up to 44 mm. Another dryer model — send us measurements and we’ll adjust it.
The styler organiser fits attachments with heads up to 60 mm; another set — to your measurements.
The cone takes handles up to 48 mm; dryers with a body wider than 92 mm sit on the rim of the cone.
Put a hot attachment into its cup 1–2 minutes after switching off.

Close-up

The universal cone holds dryers of different shapes: a pistol type, a compact one and a round-head one.

Mounting: strips of VHB tape on the back plate or two countersunk screws.

Images are renders of the 3D model — this is how the product will look once printed.

FAQ

How much does a holder cost?

Press “Get a price” next to the version you want and tell us your dryer model and colour — we’ll reply with the price within an hour during working hours.

Will it fit my dryer?

The cone fits any dryer with a handle up to 48 mm. The cradle holder is for round-head dryers like the Dyson Supersonic. Another model — send the head and handle measurements.

Will the tape hold?

Yes: we calculated the VHB tape area for the dryer with the holder and a tug on the cord, with a margin. On a rough wall, screws are better.

Won’t a hot dryer melt it?

No: the holders only touch the dryer’s body and handle, the nozzle stays in the air. Put a hot attachment in its cup after 1–2 minutes.

Is this an original Dyson accessory?

No, it’s our own design that fits dryers and stylers of this and other brands.

How do I pay and how long does it take?

Full prepayment to a card or our business account after we confirm the order. Printing takes from 1 day, Nova Poshta delivery usually 1–2 days.

Other products

All ready-made products (40)All 3D printing services

Need a holder for another dryer?

The holders are parametric models: send us the measurements of your dryer and attachments and we’ll print to them. For hotels, gyms and salons — a batch with lettering.

Telegram WhatsApp Fill in the form