Organiser and Accessories for the Tesla Model 3 and Model Y

Cup holder organiser

The stock cup holders of the Model 3 and Model Y are a deep “dumbbell” with two sockets: a small coffee rattles around and the key card has nowhere to go. The insert follows the dumbbell shape: in the front socket three spring petals hold a cup or can, in the rear one there is a key card slot (the card sticks out so you can grab it with two fingers), a coin cup and a tube. Tabs in the walls stop rattling.

Console bin organiser

The front bin under the sliding cover is deep and small things drop to the bottom. The organiser stands on the bottom with walls at the same slope as the bin, so it sits without play. Two dividers split the bin into three lanes: glasses in a case, cells for small items and a power bank with cables. The removable dividers can be moved, and the cover still closes.

A phone holder that doesn’t block the screen

The clip slides onto the left edge of the centre screen: the front jaw rests on the black bezel and a spring presses from behind — no screws or glue. The MagSafe plate sits left of the screen, angled 12° towards the driver: you see the phone without turning your head, and the screen stays clear.

Limitations

• Doesn’t fit the Model 3 Highland (2024+) or Model Y Juniper (2025+): they have a different console and screen.
• We took the sizes from accessories sold for these years: before the full print we recommend checking the fit with a test piece.
• The phone holder needs a MagSafe ring on the phone or case. By the windscreen it gets very hot in summer sun — don’t leave the holder in the sun during a heatwave.
• Cups wider than 73 mm don’t fit the insert.