3D printed toys: fidgets, figurines, puzzles and flexi animals
Fidget toys, figurines, dinosaur puzzles, flexi animals, an egg with a baby dragon, a tractor and a robot — we modelled every one of them ourselves and print them in PLA to order. And we don’t stop there: we’ll print a toy from your model too.
The classic Trefoil, a gear spinner and the Planetary — printed fully assembled, with a bearing made of plastic rollers.
Trefoil spinner
A classic three-lobe spinner with windows. Instead of a metal bearing there are seven plastic rollers in V-grooves: they print together with the body and never fall out. Hold the button in the centre with two fingers and spin.
A gear spinner: hold the centre and the body turns while four planet gears roll around it. It spins as long as you keep nudging it, and the fun is watching the gears move.
An owlet, a teddy bear and a baby dragon with fine details: feathers, stitches, scales. For a shelf, as a gift or a desk mascot.
Owlet on books
A “wise owl” sitting on a stack of two books: eyes with pupils and highlights, brows, a beak, rows of feathers on the chest and wings, claws on the cover. A gift for a teacher or a graduate.
Sitting with its tail wrapped round its feet: horns, big eyes, nostrils and a smile, fan-shaped wings, spikes along the back and tail and plates on the belly.
Flat pieces with slots — a child assembles the skeleton alone, with no glue or tools.
T. rex
A skull with openings and teeth, a spine with spinous processes, a tail with chevrons, four ribs (the front one with tiny arms), a pelvis and two legs on wide feet.
A beaked skull with three horns, a frill with openings and scallops, a spine, three ribs, shoulder and hip girdles and four legs — it stands very steadily.
They bend at every segment: the hinge is hidden inside the body and they print fully assembled. PLA in any colour — we’ll reply with the price.
Winged dragon
The biggest: a 16 cm wingspan, horns, frills, a crest along the back and a spade-tipped tail. The wings and clawed feet rest on the table, so the dragon stands on a shelf.
The scaly egg opens with a twist — a baby dragon sits inside; there’s also a sleeping one and a hatching figurine.
Egg with a baby dragon
The top of the egg turns 30° and lifts off — inside sits a baby dragon with little wings, horns and big eyes. The closed egg is held by a bayonet and won’t open by itself.
A baby dragon peeks out of a cracked scaly shell, holding the rim with its paws, with a piece of shell on its head. A stand-alone figurine for a shelf.
A round pendant with a raised name and year, as in the picture. Send your own name, word or greeting and we’ll lay it out so the letters stay easy to read.
Tell us what you’d like printed: an animal, a character, a puzzle or a gift. We’ll suggest where to find a ready-made model or design it ourselves from a photo or sketch. Modelling is charged separately.
We modelled every toy on this page ourselves and checked it before printing: hinges turn without catching, wheels don’t fall off, puzzle pieces don’t overlap and figurines stand steady. So what we sell is a print of our own model — no third-party licences.
The moving toys print fully assembled: there is a 0.4 mm gap between the moving parts, so they spin and bend straight off the printer. No glue, no screws, nothing to put together. The puzzles are the opposite — the child assembles them.
Who to give them to
Kids from 3 — a flexi dragon, the tractor or the egg with a baby dragon.
Schoolchildren — a dinosaur skeleton puzzle that goes together without glue or tools.
Grown-ups — a fidget toy or a figurine for the desk.
Colour and safety
We print in PLA — an odourless plastic that doesn’t mind moisture. Any colour: if we don’t have yours in stock, we’ll buy it for your order. The toys are not certified as children’s toys, so we recommend them for ages 3+ under adult supervision: small details such as horns, spikes and claws can break off.
We don’t stop there
Found a toy on Printables, Thingiverse or MakerWorld? We’ll print it from your file, priced by weight: PLA from 5 UAH/g. No file — we’ll model it ourselves from a drawing or exact dimensions; modelling is charged separately. More on the 3D printing service and miniature and figurine printing pages.
Close-up
Toys on a playroom rug: the owlet, a dragon egg, the tractor, the gyroscope, a flexi dragon and the robot.The “Boltyk” robot in a gift box, with the tractor beside it.The flexi dragon prints fully assembled, lying on the bed: no supports, glue or screws.The hinge in cross-section: the pin with a flared base hides under the segment’s “roof”, with the neighbour’s ring around it and a 0.4 mm gap everywhere.The flexi animals together: dragon, lizard, snake, fish, shark and caterpillar.
Images are renders of the 3D model — this is how the product will look once printed.
FAQ
How much does a toy cost?
Press “Get a price” next to the toy and leave a contact — we’ll quote within an hour during business hours. The price depends on the model and colour.
What age is it for?
Ages 3+ under adult supervision: the toys are not certified as children’s toys, and small details such as horns, spikes and claws can break off.
Will a moving toy fall apart?
No: on the flexi animals and the robot the pin of every hinge is wider at the base than the ring’s hole, and on the tractor a cone on the axle holds each wheel. You can’t take them apart without breaking them.
What colour can I order?
Any PLA: write the colour in your request. If we don’t have it in stock, we’ll buy it for your order.
How long does it take?
Printing takes from 1 day depending on the queue, and Nova Poshta delivery across Ukraine usually takes 1–2 days.
Can you print a different toy from my model?
Yes: send an STL, OBJ, STEP or 3MF file or a link to the model and we’ll price it by weight, PLA from 5 UAH/g.
How do I pay?
100% upfront to a card or our business account once we confirm the order.
Fidget toysA gear spinner, a five-ring gyroscope and a tower that screws out.
FigurinesAn owlet on books, a teddy bear and a baby dragon — with feathers, stitches and scales.
Dinosaur 3D puzzlesT. rex and Triceratops skeletons of flat slotted pieces — no glue needed.
Fidget spinnersThe classic Trefoil, a gear spinner and the Planetary — printed fully assembled.
Printing from your modelSend your model — priced by weight, free quote.